Siemens SINAMICS S120 Manual De Listas página 2416

Excit t_monit
2.0...1300.0 [s]
p1646 (20.0)
r1648.0
r1649.1
r1648.3
r1649.2
<7>
r0863.0
Excitation ready to be powered up
p1645[0]
(1)
Excitation ready
p1645[1]
(1)
Excitation operational
p1645[2]
(1)
Excitation group signal fault
p1645[3]
(1)
Excitation group signal alarm
p1645[4]
(1)
Excitation voltage present at the power unit
p1645[5]
<3> <4> <5>
(1)
Excitation in line operation
p1645[6]
<3>
(1)
Excitation at the voltage limitation
p1645[7]
<7>
(1)
<1> For VECTORGL: p1646[0] and p1646[1];
Min / Max / Factory setting: 0.1 / 60.0 / 1.0 [s].
<2> For VECTORGL:
Instead of p1647: Fixed time 0 s.
1 2
DO: VECTOR, VECTOR3P, VECTORDM, VECTORGL, VECTORM2C, VECTORSL
Vector control - Excitation (SESM, p0300 = 5)
Exc t_off
<1> 0.5...5.0 [s] <2>
p1647 (0.8)
Excitation control word
Bit No.
Control of the
excitation equipment for
separately-excited
synchronous motors (SESM)
Excitation status word
Bit No.
<3> Only for VECTORGL.
<4> Only for VECTOR3P, VECTORM2C.
<5> Only for VECTORSL: Meaning "Excitation initiation of the brief line interruption sequence".
<6> Not for VECTOR.
3 4
Meaning
0 1 = Power up excitation
1 1 = Excitation no OFF2
2 1 = Excitation no OFF3
3 1 = Excitation operation enable
7 1 = Excitation acknowledge fault
10 1 = Master control by excitation equipment
11 1 = ccwRFE: invert excitation current setpoint
Meaning
0 Excitation ready to be powered up feedback signal
1 Excitation ready feedback signal
2 Excitation operational feedback signal
3 Excitation group signal fault
7 Excitation group signal alarm
8 Excitation at the voltage limit
11 Excitation voltage present at the power unit
15 Excitation in line operation
5
fp_6495_51_eng.vsd
14.05.20 V05.02.03
p0115[2] (Motor Modules)
Excitation STW
r1648
r1648.0
r1648.1
r1648.2
r1648.3 To the excitation
r1648.7
<6> r1648.10 <6>
<3> <4> r1648.11 <3> <4>
Excitation ZSW
r1649
r1649.0
To sequence control
r1649.1
[2610]
r1649.2
r1649.3
r1649.7
<7> r1649.8 <7> [6726.3] <8>
<3> <4> r1649.11 <3> <4>
r1649.15
<3> <5> <3> <5>
<7> Not for VECTORGL.
<8> Only for SINAMICS S120/S150.
6 7
Function diagram
SINAMICS
8
- 6495 -