ENGLISH
The machine does not
1) Cultivator blades dig into the soil to an insuffi -
work the soil at the same
2)
depth all along its width.
11.0 DEMOLITION AND DISPOSAL
This operation is to be carried out by the customer.
Before demolishing the machine, you are advised to carefully check its physical condition and ascertain whether there are
any parts of the structure that may be susceptible to structural collapse or breakage during demolition.
The customer should operate in compliance with the environment protection laws in force in his/her country.
CRUSHING AND SHEARING HAZARD. POTENTIAL SERIOUS INJURIES OR DEATH.
The machine demolition operations should be carried out by skilled personnel only, equipped with suitable protective clothing
(safety footwear and gloves) and auxiliary tools and equipment. All the disassembly operations for demolition should be carried
out with the machine stopped and detached from the tractor.
Before demolishing the machine, you are advised to render harmless all the parts that may be a source of danger and therefore:
- scrap the structure using specialized fi rms,
- remove any electrical apparatus according to the laws in force,
- collect oils and greases separately, to be disposed of through specialized fi rms, in accordance with the regulations of the
country in which the machine was used.
When the machine is demolished the CE mark should be destroyed together with this manual.
Finally, we remind you that the manufacturer is always available for any and all necessary assistance and spares.
70 - EN
USE AND MAINTENANCE
cient extent.
Depth skids or roller adjusted incorrectly.
Lower lifting links adjusted incorrectly..
1) Reduce the ground speed.
2) Adjust the depth skids or the roller again.
Adjust the lower lift links again.
ATTENTION
cod. F07011998