J.P. Bowlin Sartorius Cubis II Manual página 11

Safety Instructions
10 Operating Instructions Cubis
2.1.2 Repairs and Maintenance on the Device
Device repairs and maintenance may only be carried out by persons with
specialized knowledge of the device. If the device is not repaired or
maintained by a specialist: Persons may be put at risk. Device-specific
documents and product approvals may lose their validity.
Sartorius recommends that any repair work, even that carried out after the
end of the warranty period, is carried out by Sartorius Service or after
consulting with Sartorius Service.
Only the maintenance tasks described in these instructions should be
carried out. For maintenance tasks that need to be carried out by Sartorius
Service, contact Sartorius Service.
2.2 Qualifications of Personnel
Persons who do not possess adequate knowledge about how to use the
device safely may injure themselves and other persons.
If a particular qualification is required for an activity: The target group will be
specified. If no qualification is specified: The action can be performed by the
"Operator" target group.
2.3 Functionality of the Device Parts
Non-functioning device parts, e.g., as a result of damage or wear, can cause
malfunctions. There is a risk of injury to persons.
If device parts are not functioning: Do not use the device.
t
Comply with the maintenance intervals (intervals and maintenance tasks
t
see Chapter "9.3 Maintenance Schedule", page 67).
2.4 Safety Information on the Device
Symbols, e.g., warnings and safety stickers, are safety information for
handling the device. Missing or illegible safety information may result in this
information not being observed. There is a risk of injury to persons.
Do not conceal, remove, or modify the symbols.
t
Replace the symbols if they become illegible.
t
| MCE Models
®