J.P. Bowlin Sartorius Cubis II Manual página 43

Operating Design
4.8.21 Parameters in the "APPLIC./DENSITY" Menu
Parameter Settings
DEC.PLCS NONE
1 DEC.PL.*
2 DEC.PL.
3 DEC.PL.
* Factory setting
4.8.22 Parameters in the "APPLIC./STATIST." Menu
Parameter Settings
PRT.COMP. OFF
ON*
TAR./STAT. OFF*
ON
* Factory setting
4.8.23 Parameters in the "INPUT" Menu
Parameter Settings
ID NO. Maximum of
8 characters
09-0, A-Z, - ,
space
LOT ID OFF*
ON
DATE
TIME
USER.PASS. Maximum of
8 characters
09-0, A-Z, - ,
space
* Factory setting
42 Operating Instructions Cubis
Explanation
The result of the "Density determination" application is displayed without
decimal places.
The result of the "Density determination" application is displayed to 1 decimal
place.
The result of the "Density determination" application is displayed to 2
decimal places.
The result of the "Density determination" application is displayed to 3
decimal places.
Explanation
Deactivates the component printout.
Activates the component printout.
Deactivates automatic taring after the components are saved.
Activates automatic taring after the components are saved.
Explanation
Saves the entered ID number for the device.
Deactivates the output of a line for the lot ID number for the GLP printout.
— Activates the output of a line for the lot ID number for the GLP printout.
— The LOT-ID can be entered in writing in the line.
Saves the entered date.
Saves the entered time.
Saves the entered user password.
| MCE Models
®