J.P. Bowlin Sartorius Cubis II Manual página 42

4.8.18 Parameters in the "APPLIC./TOTAL" Menu
Parameter Settings
PRT.COMP. OFF
ON*
* Factory setting
4.8.19 Parameters in the "APPLIC./ANIMALW." Menu
Parameter Settings
ACTIVIT. CALM
ACTIVE*
V.ACTIVE
START MANUAL
AUTO*
* Factory setting
4.8.20 Parameters in the "APPLIC./CALC." Menu
Parameter Settings
METHOD MUL.*
DIV.
DEC.PLCS NONE
1 DEC.PL.*
2 DEC.PL.
3 DEC.PL.
* Factory setting
Explanation
Deactivates the component printout.
Activates the component printout.
Explanation
Sets the intensity of the "Animal activity" to "calm". Recommended for minor
movements of the sample, e.g. caused by placement on the weighing pan.
Sets the intensity of the "Animal activity" to "active". Recommended for
medium movements of the sample, e.g. caused by placement on the
weighing pan.
Sets the intensity of the "Animal activity" to "very active". Recommended
for very active movements of the sample, e.g. caused by placement on the
weighing pan.
The "Animal weighing" application must be manually selected in the start
screen.
Sets the trigger to start the "Animal weighing" application to "automatic".
Explanation
Specifies multiplication as the method of calculation for the "Calculation"
application.
Specifies division as the method of calculation for the "Calculation"
application.
The result of the "Calculation" application is displayed without decimal
places.
The result of the "Calculation" application is displayed to 1 decimal place.
The result of the "Calculation" application is displayed to 2 decimal places.
The result of the "Calculation" application is displayed to 3 decimal places.
Operating Design
Operating Instructions Cubis | MCE Models 41
®