J.P. Bowlin Sartorius Cubis II Manual página 22

4.2 Operating Display in the Menu
7
6
Fig. 9: Operating display in the menu (example)
Pos . Name
1 Position in the 1st menu level
2 Position in the 2nd menu level
3 Position in the 3rd menu level
4 Position in the 4th menu level
5 [Computed values] display
6 Operating area
7 Name of the menu or setting
4.3 Operating Display Buttons and Keys
Symbol Name
[Menu] button
[isoCAL] button
[Adjust] button
1 2
Description
Shows the position of the displayed menu or configuration
value in up to 4 menu levels.
Note on the set menu item
Description
— When the button is pressed: The settings menu opens.
— If the button is held down: It switches to version display.
— Starts the set calibration or adjustment function.
— If the button is flashing: Starts the isoCAL function and performs
internal adjustment.
— Starts the set calibration or adjustment function.
— If the button is flashing: The calibration or adjustment function is
performed.
Operating Design
3 4
Operating Instructions Cubis
5
| MCE Models 21
®