J.P. Bowlin Sartorius Cubis II Manual página 87

Sartorius Service
Article
Weighing table
Weighing table made from synthetic stone, with vibration dampening
Weighing table made from wood with synthetic stone
Wall console
Dust cover
Weighing scoop made from chrome-nickel steel, (90 mm x 32 mm x 8 mm)
86 Operating Instructions Cubis
17 Sartorius Service
Sartorius Service is at your disposal for queries regarding the device. Please
visit the Sartorius website (www.sartorius.com) for information about the
service addresses, services provided, or to contact a local representative.
For inquiries about the system or when contacting Sartorius Service in the
event of a malfunction, ensure that you have the device information, e.g.,
serial number, hardware, firmware, configuration, close at hand so you can
pass it on to Sartorius Service. Consult the information on the
manufacturer's ID label and in the "Device Information" menu.
18 Conformity Documents
The attached documents declare the conformity of the device with the
designated directives or standards.
The Declaration of Conformity supplied here is for conformity-assessed
(verified) balances for use in the EEA. Please keep the enclosed Conformity
Declaration in a safe place.
19 Trademark Information
Ecolab™ Klercide is a registered trademark of Ecolab Europe GmbH.
| MCE Models
®
Quantity Order Number
1 YWT03
1 YWT09
1 YWT04
1 YDCC2MCE
1 641214