VM Motori MR 500 Serie Manual Instrucciones Para El Uso página 100

ELECTROLYTIC ZINC REPLACEMENT
Follow the procedure below.
1 -Turn off the engine and remove the ignition key.
2 -Let the engine cool down adequately to avoid being
burnt.
3 -Unscrew the nut and replace the electrolytic zinc (A).
ENGINE DISPOSAL
This operation should be carried out by experienced ope-
rators, in compliance with the legislation in force concer-
ning safety at the workplace.
Do not throw away non bio-degradable products and non
ferrous components (rubber, PVC, resins, etc.).
While decommissioning the engine, divide all the com-
ponents depending on their chemical composition and
dispose of them accordingly.
English 47
MR 500
A
Ed.4 - 02/2024
GB