VM Motori MR 500 Serie Manual Instrucciones Para El Uso página 89

FUEL FILTER REPLACEMENT
Follow the procedure below.
GB
1 -Turn off the engine and remove the ignition key.
2 -Let the engine cool down adequately to avoid being
burnt.
3 -Prepare a container to collect any leak.
4 -Remove the filter (Z) using the tool provided.
5 -Fill the new filter with the fuel from the filter being
replaced.
6 -Lubricate the gasket of the new filter before mounting
it.
7 -Fit the new filter using the tool provided.
8 -Bleed air from the fuel supply circuit (See "Fuel supply
circuit bleeding")
9 -Turn the engine on and check for any fuel leaks.
Warning - Caution
In the event of fuel leaks, identify and eliminate the
cause. If the problem persists, contact a service
workshop.
Important
Do not throw away any polluting material in the envi-
ronment. Carry out their disposal in compliance with
the relevant legislation in force.
English 36
MR 500
Z
Ed.4 - 02/2024