VM Motori MR 500 Serie Manual Instrucciones Para El Uso página 93

RESET FUSES
The engine is equipped with safety fuses, which cut out to
prevent damage to the electrical components.
GB
In the event of malfunctions due to triggering of a fuse,
the cause (overload or short circuit current) must be elimi-
nated before the fuse is reset.
Important
If the problem persists, contact a service workshop.
Follow the procedure below.
1 -Remove all the fuse guards (A).
2 -Extract the fuses (B) (one at a time) and check them
for damage.
Warning - Caution
To avoid errors when returning the fuses to their
places, always check fuses one at a time, replacing
them if necessary with a new fuse that has the same
characteristics (type, amperage, etc.).
3 -When all the fuses have been checked and replaced,
fit the respective guards (A) with care.
English
A
B
40
MR 500
B
Ed.4 - 02/2024