Publicidad
Idiomas disponibles
Idiomas disponibles
ENGINE IGNITION AND TURNING OFF
Follow the procedure below.
GB
Starting the engine
1 -Insert the key (T) and turn it clockwise to position ON.
2 -Press button (N) to start the engine and then release
the button.
3 -Run the engine at a minimum speed during the hea-
ting phase.
Important
Light-up of (red) indicator lights and/or the sounding
of a beeper indicate the presence of a fault. In these
conditions, turn the engine off immediately, then
identify and eliminate the cause of the fault.
If the indicator lights are still on and/or the beeper
still sounds when the engine is turned on again, turn
the engine off immediately and contact a service
workshop.
REFUELLING
During refuelling, make sure the fuel does not contain
any residue; in this case use specific filters.
Avoid using fuel mixed with water or other substances
which may damage the engine.
Danger - Attention
All fuels are inflammable. Any fuel leaking or drop-
ping on hot surfaces and electric components can
cause fires. Do not smoke when refuelling or nearby
any filling station..
English
Turn the engine off
4 -Run the engine at minimum idling speed for 1-2
minutes.
5 -Turn the ignition key (T) anticlockwise (pos. OFF) to
turn off the engine.
All the warning lights go off.
6 -Remove the ignition key and store it in a safe place
known only to those in charge.
Important
In the case of turbocharged engines, before
switching the engine off it should be run at mini-
mum idle speed for a few minutes in order to avoid
damaging the turbocharger.
Important
Do not use fuels with specifications other than those
indicated.
22
MR 500
Ed.4 - 02/2024
Publicidad
