Installation And Initial Commissioning; Safety Instructions - Weber Legi-Air 2050 Traduccion De Las Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 343
Chapter 6 Installation and initial commissioning
6.

Installation and initial commissioning

Safety instructions

Version: 24.05.2016
Danger through a direct or indirect contact with live parts.
DANGER TO LIFE!
Contact of persons with parts that have become live through
fault scenarios.
̶ Pull the mains plug before working on the labeller.
Danger from highly flammable label stock.
DANGER OF FIRE!
Foil and label stock are highly flammable. Risk of injury from fire
and smoke.
̶ Keep away from ignition sources and open flames.
Hazards from moving parts.
RISK OF INJURY!
Catchment and crushing risk through pneumatically or electrical-
ly powered components of the labeller.
Movements or rotations start in the labelling operation suddenly
and abruptly.
̶ Do not reach into, towards or between moving parts.
Danger from residual energy in pneumatic components.
RISK OF INJURY!
Whipping compressed air hoses, discharged parts or uncon-
trolled moving parts can cause injuries.
̶ Before creating the compressed air connection, check all
pneumatic connections for tightness and firmly attach them if
necessary.
̶ The pneumatic system slated for maintenance must be vent-
ed before the dismantling of the pneumatic components is
performed.
Risk of tripping through connection cables.
RISK OF INJURY!
Connecting cables for power, compressed air, as well as data
and signal lines are possible tripping hazards and can cause
severe injuries.
̶ Relieve the stress from the connecting cables route in such a
manner that no danger zones can develop.
Page 33 of 68
40037053 BTA Legi-Air 2050
ML-GB
DE
GB
FR
NL

Publicidad

Tabla de contenido
loading

Tabla de contenido