Residual Risks; Disposal - Weber Legi-Air 2050 Traduccion De Las Instrucciones

Chapter 2 Safety regulations
DE
GB

Residual risks

The labeller is designed such that you can safely operate it. Constructive unavoidable
hazards are avoided as far as possible through protective devices. However, a certain re-
sidual risk will always be pending! Knowing about the residual risks of the system will help
you to structure your work even safer, thus avoiding accidents. Please also observe the
special safety instructions in the respective chapters, in order to avoid the hazards.

Disposal

Version: 24.05.2016
There is a risk of injury on edges and corners.
RISK OF INJURY!
Sharp edges and sharp corners can cause abrasions and cuts to
the skin. Always keep the work area clean.
̶ Caution when working in the vicinity of sharp edges and sharp
corners. Remove unneeded items.
̶ In case of doubt wear protective gloves.
This labeller complies with the RoHS EU directive 2011/65/EC,
under observance of the therein contained usage bans and pol-
lution avoidance provisions.
Page 18 of 68
40037053 BTA Legi-Air 2050
ML-GB