Notes Regarding The Operating Instructions Use - Weber Legi-Air 2050 Traduccion De Las Instrucciones

Chapter 1 General
The operating instructions must be accessible at all times at the utilization site of the sys-
tem, and must be read and observed accordingly by persons who are tasked with the per-
formance of work on the system.
Printing errors, mistakes and changes pursuant to the latest state-of-the-art are reserved.
For clarity reasons, illustrations can be shown without protective devices.

Notes regarding the operating instructions use

The following you will find a detailed explanation of the writing and representation styles
used in this Service Manual.

Buttons and switches that need to be actuated are enclosed in square brackets.
Example: Press the [start] button to apply the change ...

Operations that must be processed in a fixed sequence are numbered.
Step
1

Special information is written in bold or highlighted in grey.
This is an example of a special information!

All illustrations (Fig.) are numbered consecutively for each chapter. This means
that a reference to "Fig. 2-1" is equivalent to the 1. illustration in Chapter 2.

Illustrations are often reduced to show the essentials, and can therefore differ
from the original. The absence of covers or protective devices in illustrations is
therefore only performed to promote a better understanding.

To address a broad range of variants, it is possible that example or principle fig-
ures can strongly differ from the original or not apply at all.

Illustrations are sometimes confined to the depiction of a single version (e.g. only
RH or only LH...), especially when the information content can be appropriately
applied to other versions.
Version: 24.05.2016
Approach
Disconnect the mains plug...
Page 5 of 68
40037053 BTA Legi-Air 2050
ML-GB
DE
GB
FR
NL