Sample Selection; Deleting Values; Printouts - RADWAG 4Y Serie Manual Del Usuario

Procedure:
1. Press < > button.
2. List of samples with tare values assigned is
displayed.
3. Press tare value that is to be applied to other
samples which do not have tare assigned yet.
4. The selected tare value is assigned automatically.

25.6. Sample Selection

Sample Selection option enables selecting a sample for weighing, with use of this option you do not
have to weigh samples in an order suggested by the software. The option is available only after
initiating a given process.
Procedure:
1. Go to differential weighing mode, select a series,
press procedure
procedure.
2. Press < >button:
3. List of samples for which the selected procedure can
be carried out is displayed.
4. Select a sample that is to be weighed.
5. This option is particularly useful if a series contains a
large number of samples, and you want to weigh a
sample that is at the end of a series.

25.7. Deleting Values

Delete option enables deleting last weighing record added to the database. It refers to all processes
in the working mode. The software enables deleting only the most recent measurement operation.
Procedure:
1. If you have saved a weighing record by mistake (sample or tare), i.e. wrong sample or container
has been used, press press <
2. The weighing record is automatically deleted, the software returns to the previous step of the
procedure.
The process can be carried out once only, otherwise respective message informing on error is
displayed, deleting a record is aborted.

25.8. Printouts

Printouts option enables you to determine content of a particular standard printout, and to define non-
standard printout.
Standard printout comprises five internal blocks, each containing different variables.
Variable settings: YES – print; NO – do not print.
Settings for header, GLP, and footer printouts are specified in section 14.7. For settings of series and
sample printout template read below.
button, e.g. <Weighing
> button.
A>
- 115 -