Animal Weighing; Animal Weighing Settings - RADWAG 4Y Serie Manual Del Usuario

Standard liquid
Temperature
Density of standard liquid
Weighing 1
Weighing 2
Density
-------------------------------------------------------------------
Signature
Using header and footer information
Procedure:
1. Press < Print header> button.
2. Carry out density determination procedure.
•
Report is printed out automatically after the second measurement confirmation.
•
When density determination result is displayed, the report can be printed repeatedly by
pressing <
3. Press < Print footer> button upon completion of density determination procedure.
Caution!
Remember to select data to be printed in the header, footer and report. For detailed information go to
section 14.7, Printouts.
21.

ANIMAL WEIGHING

< Animal weighing> is a working mode allowing reliable determination of mass of weighed
objects in motion. In principle, this type of objects generate unstable measurement, thus it requires
using a different filtering method of measurement signal.
Animal weighing mode screen

21.1. Animal Weighing Settings

Animal Weighing mode parameters must be set with regard to selected mass analysis method.
Procedure:
1. Press < Animal weighing> button.
2. List of Animal Weighing parameters is displayed:
•
Averaging time
Time interval within which measurements are analysed. Obtained data is used for calculation
of measurement result.
Water
22 °C
3
0.9978 g/cm
10.526 g
2.586 g
1.322776 g/cm
PRINT> button.
- 89 -
3
1. Setup – press to access balance menu.
2. Print header – press to print data declared
in the header.
3. Print footer – press to print data declared in
the footer.
4. Products Database – press to select
products from products database.
5. Set tare.
6. Animal weighing.