RADWAG 4Y Serie Manual Del Usuario página 185

XX _ OK CR LF
ES_CR LF
XX _ E CR LF
XX - stands for a name of a sent command
_ - space
Zero Balance
Format: Z CR LF
Response options:
Z_A CR LF - command understood and in progress
Z_D CR LF - command carried out
Z_A CR LF - command understood and in progress
Z_^ CR LF - command understood but zeroing range is exceeded
Z_A CR LF - command understood and in progress
Z_E CR LF - time limit exceeded while waiting for stable measurement result
Z_I CR LF - command understood but not accessible at this moment
Tare Balance
Format: T CR LF
Response options:
T_A CR LF - command understood and in progress
T_D CR LF - command carried out
T_A CR LF - command understood and in progress
T_v CR LF - command understood but taring range is exceeded
T_A CR LF - command understood and in progress
T_E CR LF - time limit exceeded while waiting for stable measurement result
T_I CR LF - command understood but not accessible at this moment
Give Tare Value
Format: OT CR LF
Response: OT_TARE CR LF - command carried out
Response format:
1 2 3
O T space
Tare - 9 characters, right justification
Unit - 3 characters, left justification
Caution:
Tare value is always given in an adjustment unit.
Set tare
Format: UT_TARE CR LF, where TARE - tare value
Response options:
command carried out
command not recognised
time limit exceeded while waiting for stable measurement result
(time limit is a characteristic balance parameter)
COMMANDS OVERVIEW
4-12 13
tare space
- 185 -
14 15 16
unit space
17 18 19
CR LF