Mode Related Settings; Density - RADWAG 4Y Serie Manual Del Usuario

•
< Checkweighing thresholds> settings: Min = 90%, Max = 110%.
•
target value = 105%; tolerance = 5% <
•
reference mass = 19.986 g <

19.4. Mode Related Settings

To find out more about the remaining functions refer to section 15.7 of this user manual, Additional
Parameters for a Weighing Process..
20.

DENSITY

< Density> is a working mode enabling to determine density of:
• solid bodies,
• liquids,
• air (available for XA 4Y),
• various substances with use of pycnometer.
In order to operate this mode, a density determination kit (supplementary equipment) is required.
Density mode screen
>,
>.
1. Setup – press to access balance menu.
2. Print header – press to print data declared
in the header.
3. Print footer – press to print data declared in
the footer.
4. Solid density
5. Liquid density
6. Air density
7. Pycnometer
- 82 -