Pipette Calibration Reports; Series - RADWAG 4Y Serie Manual Del Usuario

6. Nominal volume
7. Minimum volume
8. Channels quantity
9. Type
10. Tested volumes
30.12.

Pipette Calibration Reports

Pipette reports provide information about carried out pipettes calibrations. In case of multichannel
pipettes, reports are generated for each channel separately. Each report can be previewed, searched
by date or exported and printed out.
Procedure:
1. Enter < Databases> submenu and press <
2. Select report, if not visible, scroll the list using navigation buttons.
3. Report is named by date and time; e.g. 2012.03.12 11:12:15.
Caution! It is possible to use 'search report' option.
List of pipette calibration report data:
1. Pipette
2. Serial no.
3. Channel no.
4. Start date
5. End date
6. Operator
7. Customer
8. Measurements quantity
9. Operation with adherence to ISO 8655
10. Status
11. Temperature
12. Humidity
13. Pressure
14. Water temperature
15. Z coefficient
30.13.

Series

Series database contains series data and samples measurements.
Procedure:
1. Enter < Databases> submenu and press <
2. Press < Add> button to add a new series, or
3. Select already existing series.
List of parameters defined for series:
1. Name
2. Code
3. Customer
4. Samples
5. Samples quantity
Pipette calibration reports> entry.
[pipette name]
[serial no. entered during calibration]
[name of an operator carrying out calibration]
[customer name]
[quantity of measurements for each tested volume]
[information if errors comply with the standard]
[information whether errors are below permissible values
accepted for the tested volume]
[average temperature value during the process]
[average humidity value during the process]
[average pressure value during the process]
[average water temperature during the process]
[coefficient value for given temperature]
Series> entry.
- 150 -