Weighing Records; Customers - RADWAG 4Y Serie Manual Del Usuario

18. Internal control
19. SQC
20. Density
21. Shelf-life time in days
22. Date
23. VAT
24. Ingredients
25. Printout
Caution!
Remember to assign products to corresponding functions, as some of data values are attributed
according to their modes, e.g. thresholds in <Checkweighing> mode are set in [g], while thresholds in
<Parts counting> mode are set in [pcs]. The values are selected automatically depending on which mode
is enabled while entering a database.

30.3. Weighing Records

Each weighing result sent from the weighing device to a printer is saved to weighings database (read
section 16.1, Result control).
You can preview data of particular weighing records.
Procedure:
1. Enter < Databases submenu.
2. Enter < Weighing records> database and press respective record.
List of parameters defined for a weighing record:
1. Measurement date.
2. Measurement result.
3. Tare value.
4. Stable/unstable measurement marking.
5. Air buoyancy control on/off marking.
6. Product name.
7. Operator.
8. Customer, customer name.
9. Working mode name.
10. Warehouse, source warehouse name.
11. Packaging, name of tare applied during product weighing.
12. Result control, information regarding range within which the weighed product is placed:
MIN – below LOW threshold (possible only if <Result control> is set to <NO> value),
OK – between the LOW and HIGH thresholds,
MAX – above HIGH threshold (possible only if <Result control> is set to <NO> value).
13. Weighing platform no., field with number of a weighing instrument by means of which a
measurement was carried out.
14. Level status, information on level status maintained during the measurement.
15. Ambient conditions alerts, information regarding stability of temperature and humidity during the
measurement.

30.4. Customers

Customers database contains name of Customers for whom the measurements are carried out.
[Option available only for <PGC> mode, allows for
specification of internal control criteria accordant with
company standards for a given product]
[Option available only for <SQC> and <Mass control>
modes, allows for specification of internal control criteria
accordant with company standards for a given product]
[Product's density,
compensating air buoyancy,] - [g/cm
[Product's date (constant)]
[VAT value related to a product]
[Field for inserting names of product's ingredients, or for
additional description
application, etc.]
[Template assigned to a product]
- 143 -
used as sample
3
]
regarding product's
density for
features,