Settings; Balances With A Built-In Ioniser - RADWAG 4Y Serie Manual Del Usuario

Wireless connection
No. Pictogram
1
2
3.8.3.

Settings

In order to provide long enough operation while powering the device by means of battery, go to Misc.
function group and set <Sleep mode> and <Display brightness> parameters respectively. For
detailed information read section 34 of this user manual: Miscellaneous Parameters).

3.9. Balances with a Built-In Ioniser

Safety notes contain important information on safety issues.
Ignoring the safety notes may lead to personal injury, damage to the instrument or breakdown.
Safety notes are marked with the following signal words and warning symbols:
Do not touch ions source. This may cause electric shock (during operation) or injury
(components generating ions are sharp).
Should you notice any signs of incorrect operation (smoke, burnt material smell,
irregular ionizer warming), disconnect the device from the mains immediately.
Should water or any foreign bodies get inside the ionizer, behave likewise, i.e.
disconnect the ionizer from the power supply immediately.
Due to high voltage, typical for the ionizer, remain extremely careful while operating
it.
It is not allowed to either disassemble or modify the ionizer. Use the device only as
intended.
The antistatic ionizer,
XA.4Y.A.PLUS
balance, neutralizes electric charges inside the weighing chamber upon placing the
sample in it. The lower the value of relative humidity and a reading unit of the balance, the more
evident influence of static electricity. The ionizer neutralizes uncompensated electric charge
accumulated on weighed object. Affected operation as a results gives greater repeatability error,
often also
Measurement errors, due to the harmful effects of electrostatics, often reach the value of thousands
of reading units and more. The problem concerns non-conductive samples, e.g. glass flasks, paper
filters,
Implemented in the XA 4Y.M.A.I microbalance antistatic ionizer is a modern technology solution
which compensates both cations and anions. The ionizer activates when the microbalance door
opens, and deactivates when the door is closed.
Description
Connection between wireless modules established correctly – correct
cooperation.
No connection between wireless modules established.
an in-built component
greater
XA 4Y.M.A.PLUS
of
error
plastics,
- 34 -
microbalance
of indication.
and
etc.