Ambient Conditions - RADWAG 4Y Serie Manual Del Usuario

Average
Mean [%]
Standard deviation
Standard deviation [%]
Min
Max
T4- errors quantity
T3- errors quantity
T2- errors quantity
T1- errors quantity
T1+ errors quantity
T2+ errors quantity
T3+ errors quantity
T4+ errors quantity
Batch quantity
Measurements graph
Probability
graph
Each report can be printed.
Procedure:
1. Select the report and display its details.
2. Press < Print> button located on the upper bar.
3. The printer connected to balance's terminal prints the report.
The database can be exported to a file. To do that, press <
30.16.

Ambient Conditions

<Ambient conditions> database contains parameters related to ambient conditions. Depending on
the balance type, the ambient conditions report can provide values of temperature, humidity,
atmospheric pressure. If the given balance is connected to a THB module then its indications are
recorded to the database too.
Procedure:
1. Enter < Databases> submenu and press <
2. Select report, if not visible, scroll the list using navigation buttons.
3. Report is named by date and time.
Caution! It is possible to use 'search report' option.
Mean mass value determined during control
Mean mass value determined during control [%]
Standard deviation of carried out control
Standard deviation of carried out control [%]
Min threshold, mass below this threshold is not included into
control.
Max threshold, mass above this threshold is not included
into control.
Quantity of errors in the course of control
Controlled batch quantity determined in a report
Graph presenting particular measurements in coordinates
system.
distribution
Export to a file> button.
Ambient conditions> entry.
- 153 -