Printouts - RADWAG 4Y Serie Manual Del Usuario

8. With all formulation ingredients weighed a report on completed process is printed and saved to
reports database (report template is editable, to edit a report template go to <Printouts>
parameter), message <Completed> is visible in the bottom bar. To proceed press <
Procedure 3 Formulation recorded in the Formulation Database – using multiplier function.
This procedure is useful when you need to prepare a mixture of mass different from the total mass
(previously saved to database) of used ingredients. In such case, there is no need for you to carry
out complex calculations of ingredients' mass. The software adjusts mass of each ingredient in
relation to pre-defined target mass of the complete formulation. Follow the displayed prompts.
1. Press < > button (Formulation).
2. List of Formulations is displayed, select the formulation that is to be carried out.
3. Press < > button (Formulation with target mass).
4. Window with an on-screen keyboard for entering target mass of a mixture is displayed.
5. Confirm entered multiplier value, formulation making process starts automatically . The following
parameters are displayed: selected formulation name, the first ingredient name, ingredient
number, mass to be weighed and target mass. Mass of each ingredient is automatically
recalculated (proportionally) to the value of defined target mass of the complete formulation.
6. Put the container used for carrying out the measurement on a weighing pan and tare the
indication when it is stable.
7. Dispense specified amount of the ingredient.
8. Confirm ingredient mass value, the software automatically adds the mass to the sum of weighed
formulation ingredients, the next ingredient weighing begins.
9. With all formulation ingredients weighed a report on completed process is printed and saved to
reports database (report template is editable, to edit a report template go to <Printouts>
parameter), message <Completed> is visible in the bottom bar. To proceed press <
In order to print report on completed formulation making processes enter Formulation Reports
Database.

22.5. Printouts

Printouts option enables you to determine content of a particular standard printout, and to define non-
standard printout.
Standard printout comprises four internal blocks, each containing different variables. Variable
settings: YES – print; NO – do not print.
Settings for header, GLP, and footer printouts are specified in section 14.7. For settings of
formulation report read below. You can design report content.
Caution!
In order to specify which measurement data is to be printed on a report it is necessary to modify settings
for <Weighing printout template> parameter. To enable particular measurement data printout, set it to
<YES> value. Upon each completed formulation process the program generates a report. The report is
recorded in < Formulation reports> database. Report files are named by date and time of formulation
process performance.
- 94 -
> button.
> button.