Destructive Empty-Full And Full-Empty Control Mode; Control According To Internal Criteria - RADWAG 4Y Serie Manual Del Usuario

Load empty 1/3
Upon control completion, a report is generated, control is automatically saved to database.
Caution!
The template and an example of control report are to be found further down this user manual.
28.10.

Destructive Empty-Full and Full-Empty Control Mode

In case of Destructive control, for lot exceeding 100 pcs, sample set by the software for test is
always 20 pcs. The other control assessing criteria are set in accordance with the law regulations.
Procedure:
1. Select product from the list, set parameters for destructive control and determine batch portion
value.
2. Start destructive control; prompts helping you to go through control process are displayed (as in
case of the controls described above).
Depending on set control mode, the order of products to be weighed is either: empty-full or full-
empty.
Caution!
It is necessary to weigh empty packages in the same order as packages filled with product. With this,
software correctly calculates mass of a load placed in its corresponding packaging.
Upon control completion, summary of the process is generated, control is automatically saved to
database.
Caution!
The template and an example of control report is to be found further down this user manual.
28.11.

Control According to Internal Criteria

1. Select appropriate product with control data entered correctly in accordance with internal criteria
(see: previous sections of this user manual).
2. Enter PGC mode parameters into balance memory (in accordance with user manual).
3. Press button to start control.
4. During the control process the software continuously analyses measurements results and displays
them in the appropriate fields informing the user about the control results:
- Packaging tare.
- Control status.
Prompt regarding process course.
-
Command specifying value of batch portion.
- Display of numeric data/graph.
- Abort control process.
- 133 -