Parts Counting; Mode Related Settings - RADWAG 4Y Serie Manual Del Usuario

16.

PARTS COUNTING

< Parts counting> is a working mode enabling you to determine quantity of small pieces of the
same mass, which determination is done on the basis of reference weight value of single piece. The
single piece weight value can be:
•
determined using a reference quantity of parts subjected to weighing,
•
acquired from database of products,
•
entered manually as a numeric value.
Mode activation procedure:
1. Go to the home screen, press
modes opens.
2. Select < Parts counting> mode, the home screen is displayed automatically, it features
pictogram.
Parts Counting mode screen

16.1. Mode Related Settings

The supplementary settings enable you to adjust the working mode to your needs and requirements.
Procedure:
1. Press grey workspace area, menu is displayed.
2. Press <Settings> parameter. List of functions related to Parts Counting mode is displayed:
Functions:
•
ACAI, Automatic Accuracy Correction:
•
YES, weight value of a single piece to be updated.
•
NO, weight value of a single piece not to be updated.
pictogram, <Working modes> submenu with list of working
1. Setup – press to access balance menu.
2. Print header – press to print data declared
in the header.
3. Print footer – press to print data declared in
the footer.
4. Products Database – press to select
products from products database.
5. Set part mass
entering mass of a single part.
6. Determine part mass – press to set mass of
a single part using reference sample
comprising specified number of parts, e.g.:
10 pcs, 24 pcs, etc.
- 73 -
– press to edit field for