RADWAG 4Y Serie Manual Del Usuario página 194

Give Program Version
Format: RV <CR><LF>
Response options:
RV_A_"x" <CR><LF>
RV_I <CR><LF>
x - program version (in between inverted commas).
Example:
Command: RV <CR><LF>
Response: RV_A_" 1.1.1"
Set AUTOZERO Function
Format: A_n <CR><LF>
Response options:
A_OK <CR><LF>
A_E <CR><LF>
A_I <CR><LF>
n - parameter, decimal value determining autozero settings:
n → 0 – autozero off
1 – autozero on
Caution:
Command changes settings for a current working mode.
Example:
Command: A_1<CR><LF>
Response: A_OK<CR><LF>
AUTOZERO function operates until it is turned off by A0 command.
Set Ambient Conditions State
Format: EV_n <CR><LF>
Response options:
EV_OK <CR><LF>
EV_E <CR><LF>
EV_I <CR><LF>
n - parameter, decimal value determining ambient conditions state.
n → 0 – unstable ambient conditions
1 – stable ambient conditions
Caution:
Command changes settings for a current working mode.
Example:
Command: EV_1<CR><LF>
Response: EV_OK<CR><LF>
<AMBIENT CONDITIONS> parameter is set to value <STABLE> until command EV 0 swaps it to
value <UNSTABLE>.
Give Set Ambient Conditions
Command overview:
Information on currently set ambient conditions state is returned.
Format: EVG <CR><LF>
Response options:
- command understood, response: program version
- command understood but not accessible at this moment
- command carried out
- error in-course of command execution, no parameter or incorrect format
- command understood but not accessible at this moment
- command carried out
- error in-course of command execution, no parameter or incorrect format
- command understood but not accessible at this moment
- return program version
- program version - "1.1.1"
- turn autozero function on
– autozero on
- set value 'stable' for ambient conditions option
- value 'stable' set for ambient conditions option
- 194 -