Weighing Unit Selection; Good Weighing Practice; Levelling - RADWAG 4Y Serie Manual Del Usuario

15.1. Weighing Unit Selection

Change of weighing unit is carried out by pressing the weighing unit pictogram visible next to the
value of measurement result. Upon pressing the weighing unit, list of available units is displayed.
Select the unit you need, the software automatically recalculates indicated value.
Units list:
Unit Symbol
Gram
Milligram
Kilogram
Carat
Pound
Ounce
Ounce Troy
Pennyweight
* - units accessibility is conditioned by the weighing instrument type.
For non-verified weighing instruments all non-SI units are available.

15.2. Good Weighing Practice

To assure long-term operation and correct mass measurements, follow the rules presented below:
•
Start the balance with no load on the weighing pan (permissible value of load on the weighing
pan at start is ±5% of the maximum capacity).
•
Load the weighing pan steadily avoiding shocks.
•
Go to <Setup/Misc./Vibrations Detection> parameter and enable control of weighing pan
loading (for detailed information read section 34.8).
•
Place weighed loads centrally on the weighing pan.
•
Avoid side loading, in particular side shocks.

15.3. Levelling

The PLUS ultra-microbalances and microbalances and the A.PLUS microbalances and analytical
balances are equipped with Reflex Level System, which allows monitoring of the balance level and
automatic levelling.
The new system of the PLUS balance guarantees:
Verified
balance
[g] Yes
[mg] Yes*
[kg] Yes*
[ct] Yes*
[lb] No
[oz] No
[ozt] No
[dwt] No
Unit
Taele Hongkong
Taele Singapore
Taele Taiwan
Taele China
Momme
Grain
Newton
Tical
Mesghal
- 60 -
Symbol Verified
balance
[tlh] No
[tls] No
[tlt] No
[tlc] No
[mom] No
[gr] No
[N] No
[ti] No
[msg] No