Average Tares; Pipettes - RADWAG 4Y Serie Manual Del Usuario

30.10.

Average Tares

Prior to <Non-destructive average tare> control you can determine average tare by packages
weighing. Each process is automatically saved to <
saved to the database features specific number assigned at the moment of control completion.
Control number format:
X / y y / M M / d d / H H / m m / T, where:
X - control type, marked as follows:
U - control regulated by the act,
Z - control completed by an operator,
W - control regulated by internal criteria,
yy - year of control end,
MM - month of control end,
dd - day of control end,
HH - hour of control end,
mm - minute of control end,
T - control from average tare value determination.
You can preview data on each process of average tare value determination.
Procedure:
1. Enter < Databases> submenu, follow procedure described in section 30 of this user manual.
2. Enter < Average tares> database and select a desired control record.
List of parameters defined for average tare:
1. Product
average tare value determination]
2. Status
3. Date
4. Tare
5. S
6. 0.25 T1
7. Measurements quantity
8. Operator
9. Method
30.11.

Pipettes

Pipettes database contains data of pipettes that are to be calibrated.
Procedure:
1. Enter < Databases> submenu and press <
2. Press < Add> button to add a new pipette, or
3. Select already existing pipette.
List of parameters defined for pipettes:
1. Name
2. Code
3. Model
4. Tip
5. Volume type
(function disabled for standard balance models)
Average tares> database. Each control
[name of a product, packaging of which is subjected to
[process status (result)]
[process performance date]
[determined packaging tare value]
[average standard deviation]
[the value of a criterion for process result]
[quantity of carried out tare value measurements]
[name of an operator carrying out the process]
[control method (regulated by the act or by internal criteria)]
Pipettes> entry.
- 149 -