Control Operation - RADWAG 4Y Serie Manual Del Usuario

2. The previous screen is displayed automatically.
•
Batch number: use this function to enter identification number for controlled products batch.
Procedure:
1. Select <
keyboard is displayed.
2. Enter the required batch number and press
For detailed information regarding remaining functions read section 15.7, Additional Parameters for a
Weighing Process.

26.3. Control Operation

Procedure:
1. Press < Product> button to select product to be controlled.
2. Press button located in the bottom bar to initiate the control; an edit box with an on-screen
keyboard opens.
3. Enter the batch number and press
the next process steps.
In the course of the control, measurement results are analysed in real time and the following prompts
are displayed:
Batch quantity 1 / 10
Product
Batch number> parameter, Batch Number edit box with an alphanumeric
button to confirm the operation. The software proceeds to
- A command on process course and the quantity of
all measurements in a tested batch.
- Controlled product name.
- 119 -
button to confirm.