Publicidad
Idiomas disponibles
Idiomas disponibles
1 English
Code
Name
SToF
Safe Torque OFF
◆
Disposal Instructions
Correctly discard the drive, packing material, battery, and microSD card as specified by regional, local, and
municipal laws and regulations for this product.
Note:
• Remove the battery and microSD card from the keypad before you discard the drive.
• Yaskawa recommends that customers physically destroy the microSD card in a shredder or use data wipe software to fully erase the
card.
■
WEEE Directive
The wheelie bin symbol on this product, its manual, or its packaging identifies that you must recycle it at the end
of its product life.
You must discard the product at an applicable collection point for electrical and electronic equipment (EEE). Do
not discard the product with usual waste.
◆
European Standards
The CE Mark identifies that the product meets environmental and safety standards in the European Union.
Products manufactured, sold, or imported in the European Union must display the CE Mark.
European Union standards include standards for electrical appliances (Low Voltage Directive), standards for
electrical noise (EMC Directive), and standards for machinery (Machinery Directive).
This product displays the CE Mark in accordance with the Low Voltage Directive, the EMC Directive, and the
Machinery Directive.
European Directive
Low Voltage Directive
2014/35/EU
EMC Directive
2014/30/EU
Machinery Directive
2006/42/EC
Restriction of the use of certain hazardous substances (RoHS)
2011/65/EU
Refer to "EU Declaration of Conformity" for the year of the Harmonized Standards.
*1
The customer must display the CE Mark on the final device containing this product. Customers must verify that
the final device complies with EU standards.
38
Causes
One of the two terminals H1-HC or H2-HC
received the Safe Disable input signal.
The Safe Disable input signal is wired incorrectly.
There is internal damage to one Safe Disable
channel.
Figure 1.12 CE Mark
Table 1.10 Harmonized Standards
EN 61800-5-1
EN 61800-3
• EN ISO 13849-1:2015 (PL e (Cat.3))
• IEC/EN IEC 62061 (Maximum SIL3)
• EN 61800-5-2 (SIL3)
EN IEC 63000
YASKAWA TOMPYEULA7002A LA700 Series Installation and Operation Instruction
Possible Solutions
• Make sure that the Safe Disable signal is input from an
external source to terminals H1-HC or H2-HC.
• When the Safe Disable function is not in use, connect
terminals H1-HC and H2-HC.
Replace the board or the drive. For information about replacing
the control board, contact Yaskawa or your nearest sales
representative.
Harmonized Standards
*1
*1
*1
*1
*1
Publicidad
