Descargar Imprimir esta página

NuVasive NVM5 Manual De Instrucciones página 19

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 146
WARNINGS AND PRECAUTIONS cont.
WARNING: Keep electrodes out of the reach of children;
WARNING: Replace self-adhesive electrodes if they no longer stick firmly to the patient's
skin.
WARNING: The patient may experience skin irritation and burns beneath the stimulation
electrodes applied to their skin; and
WARNING: The patient may experience headache and other painful sensations during
or following the application of electrical stimulation near their eyes and to their head and
face.
WARNING: Do not run any NVM5
stimulation while Bendini
is the active displayed
®
®
screen;
WARNING: Setting Free Run threshold too high may result in missed free run alert;
WARNING: If system data acquisition seems inaccurate or if the software application does
not initiate or malfunctions during use, and recommended steps to restore the system are
not successful, abort use of the system.
WARNING: The system is not suitable for use in the presence of a flammable, anesthetic
mixture with air or oxygen or nitrous oxide.
WARNING: A red tracking icon on the GUI (Graphic User Interface) indicates that the
system is not actively tracking a Digitizer. In the event a red tracking icon is observed,
verify the appropriate operating ranges have been achieved and that the unit is correctly
assembled. Reposition and/or reconnect the unit as necessary until a green tracking icon
is achieved.
WARNING: The Bendini System has been successfully tested against the requirements of
IEC 60601-1-2. However, radio frequency (RF) interference could hamper its operation or
the operation of other nearby electrical devices. If you suspect either of these conditions,
move the conflicting equipment farther apart, separate the equipment with a RF barrier, or
discontinue use of the system.
WARNING: Movement of the patient during the course of data acquisition may result
in inaccurate measurements. Efforts to immobilize the patient during data acquisition
should be taken to restrict movement of the patient. If movement of the patient during data
acquisition is observed or suspected, start the sequential data acquisition process from
the beginning in order to ensure accurate measurements.
17

Publicidad

loading