STOPPING THE MACHINE WHEN WORK HAS BEEN COMPLETED
The illustration shows the intervention points and the description explains the procedures to be
followed.
D
C
B
1. Turn command F to "OFF".
– The cutting blades are deactivated.
2. Operate the command T to bring the cutting
deck to the maximum height position.
3. Operate the joystick commands R-S to move
the machine to the parking zone.
4. Operate the command Q to reduce the engine
revolutions to a minimum.
5. Press and hold the command U and release it
R
Q
A
121
S
E
F
T
when the engine shuts down.
– The warning light C comes on.
6. Press the command E.
– The remote control shuts down
7. Turn key D to position "0"..
Important
The key D should be removed ONLY in case of
need.
EN
U