Publicidad
Idiomas disponibles
Idiomas disponibles
REPLACING OR REVERSING THE CUTTING BLADES
The illustration shows the intervention points
and the description explains the procedures to
be followed.
C
– Place the machine on a stable and flat surface.
– Stop the machine.
Caution - Warning
Carry out the operations after switching off the
machine.
Blade replacement/reversal
▀
1. Unscrew nut A with the relevant wrench sup-
plied.
2. Slide out the blade bolt B and blade C.
3. Replace any damaged blade or turn it by 180°
(see the adjacent illustration).
4. Fit again bolt B in the original position.
5. Screw up nut A with the relevant wrench.
NOTE
After using the blades for a certain number of
hours, you can start reversing them to make the
most of their cutting line from both sides.
A
B
147
EN
Publicidad
