Publicidad
Idiomas disponibles
Idiomas disponibles
GREASING THE TRACK TENSIONER
The illustration shows the intervention points and the description explains the procedures to be
followed.
1. Follow the „Tracks disassembling"procedure.
EN
2. Apply grease with a suitable tool in the stated
point.
EXTENDED INACTIVITY TIME OF THE MACHINE
In case an extended inactivity time of the ma-
chine is expected, carry out the listed operati-
ons.
– Perform a general cleaning.
– Clean the air filter.
– Disconnect the batteries using the battery cut-
off switch and store the key in a place accessi-
ble to authorised staff only.
– Check all the machine's parts and replace them,
if necessary.
– Check the tightening of the fastening screws of
the main working parts.
– Let the engine cool down and empty the tank of
the fuel before storing the machine.
3. Follow the „Track assembling" procedure".
Caution - Warning
During the intervention, DON'T smoke, do not
cause sparks or use open flames to avoid any
risks of explosion or fires.
– Store the machine in a protected place that is
accessible to authorised staff only.
– Remove the battery from the remote control and
store it in a suitable place.
– In order to prevent surfaces from getting rusty,
carry out a painting treatment in the points whe-
re the paint is missing or shows signs of wears.
132
Publicidad
