Ecotech Italia H24 Lynx Manual De Uso página 85

H27 Panther/H24 Lynx has been designed to work on extreme slopes, but before carrying
out any operation, it is always essential to evaluate the conditions of the soil where the
machine will be used.
Ecotech Italia declares that, when the machine is stopped, it has a maximum lateral over-
turn angle of 65° (maximum lateral static overturn angle) on a flat surface. Therefore, if the
operator is going to work on extreme slopes, he has to take this limit into account and has
to be pay the utmost attention.
If the operator is working on soils with slopes exceeding 20°, he has to reverse the forward
direction making a 180° turn at least every 5 minutes to guarantee the optimum lubrication
of the engine.
It is forbidden to copy, even partially, this document without the manufacturer's written authorisation. He carries out a continuous improvement policy and reserves
the right to change this document without prior advice provided that this does not imply any risks for safety.. © 2020 - Ecotech Italia S.r.l. - Forlì
Important
85
EN