Ecotech Italia H24 Lynx Manual De Uso página 137

LITHIUM BATTERY RECHARGING (12V)
The illustration shows the intervention points
and the description explains the procedures to
be followed.
H27 PANTHER
B
A
1. Place the machine on a stable and flat surface.
2. Stop the machine
3. Make sure that the battery cut-off switch A is in
position "1" (inactivated) and ignition key B is
in position "0".
4. Connect the battery charger to the battery ter-
minals, as shown in the figure.
5. Carry out the complete recharging of the bat-
tery.
6. Disconnect the cables when recharging is com-
plete.
Important
!
Use a suitable battery charger for the type of
battery.
H24 LYNX
137
EN