VM Motori R756EU6C Manual De Instrucciones página 80

SAFETY WARNINGS FOR THE ELECTRICAL EQUIPMENT
The electrical equipment was designed and
manufactured according to the provisions of
the standards in force on the matter.
– Do not use quick starters to start the
engine.
– Do not disconnect the electrical
power supply when the engine is
running.
RESIDUAL RISKS
During the engine design and manufacture
phases, the manufacturer paid special
attention to the aspects which may cause
any risk for the safety and health of people
interacting with the engine.
Despite this, some potential and hidden
risks still exist.
English
Before disconnecting power supply,
turn off the engine and wait for at least
60 seconds.
– Before performing arc welding on the
frame where the engine is installed,
ALWAYS disassemble the electronic
control unit and protect all electrically
connected devices that are installed
close to the negative pole (ground).
- Danger of injury to upper limbs:
Do not put your hands inside any
moving part.
- Danger of burning/scalding:
Pay attention to hot surfaces and
radiated heat.
17
R756EU6C
GB
42432100F