VM Motori R756EU6C Manual De Instrucciones página 92

DIESEL PARTICULATE FILTER (DPF) REGENERATION WARNING LIGHT
When the Diesel Particulate Filter (DPF)
Regeneration warning light turns on
DPF regeneration process is required. This
process can be activated:
1- by driving the vehicle as prescribed
by the manufacturer, with engine at
operating temperature of 70°C - 80°C
(158°F - 176°F) until the warning light
turns off. If the warning light remains
on, turn off the engine and contact
immediately the manufacturer of the
vehicle or a workshop authorised by VM
MOTORI FCA ITALY to solve the problem.
2 - by pressing the "REGENERATION
REQUEST BUTTON" (for vehicle
provided with this function, see page 30).
The activation frequency of Diesel
Particulate Filter Regeneration warning
lamp may depend on the conditions of
use of the vehicle in which the engine is
installed.
English
If the Particulate Filter regeneration
the
request warning is ignored, the MIL
warning light
problem on the anti-pollution control
system.
The MIL warning light may turn on
together with other warning lamps
installed by the vehicle manufacturer.
If the MIL warning light turns on, contact
the manufacturer of the vehicle in which
the engine is installed or a workshop
authorised by VM MOTORI FCA ITALY.
Irreversible damage to particulate filter
may occur if the engine is used with DPF
particulate filter and MIL warning lights on.
29
R756EU6C
turns on to signal a
42432100F
GB