Publicidad
Idiomas disponibles
Idiomas disponibles
ROUTINE MAINTENANCE TABLE
Frequency
Every 10 hours
Every 50 hours
Every 100 hours
/ 1 year
Potentiometer, Accelerator
Every 200 hours
/ 1 year
Engine alignment, engine
(1)* If the engine has not been oper
at least once a year.
case at least every 12 months.
least every 24 months.
at least every 12 months.
5 years (see related maintenance interval on page 36).
English
Component
Engine oil (1)*
Coolant (3)*
Galvanic anode (6)*
Electrical connections
and related cables
Serpentine belt
Sea water pump
cartridge (2)*
Coolant
Turbocharger
Galvanic anode
brackets
Type of operation
level control, topping up if
necessary
level control, topping up if
necessary
integrity check, replace if ne-
cessary
integrity check, replace if ne-
cessary
level control, topping up if
necessary
integrity check, corrosion, da-
mage, loosening
integrity check
integrity check
checking-replacing worn out
parts
replacement
control
replacement
lubrication of variable geometry
control rod
cleaning
replacement
Checking, tightening
35
MR 506
Reference
Refer to engine oil level
check on page 45
level check on page 48
Refer to galvanic anode
inspection and replacement
on page 57
on page 58
Please contact an autho-
rised VM MOTORI FCA
ITALY workshop.
Please contact an autho-
rised VM MOTORI FCA
ITALY workshop.
Refer to serpentine belt on
pages 61 - 62
Please contact an autho-
rised VM MOTORI FCA
ITALY workshop.
Refer to engine oil and
pages 46 - 47
Please contact an autho-
rised VM MOTORI FCA
ITALY workshop.
replacement (page 54)
Refer to lubrication of varia-
ble geometry control rod on
page 60
page 53
Refer to galvanic anode
inspection and replacement
on page 57
Please contact an autho-
rised VM MOTORI FCA
ITALY workshop.
42432070F
Ed.1 - Nov. 2019
GB
Publicidad
