Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION - WARNING
GB
Avoid running the engine above 1400 rpm out-
of cooling water.
Operating with the engine running outside the
water at high rpm may cause the water inlet
pipe to collapse and cause the engine to oper-
8 - Run the engine at idle speed for about 10 min-
utes or until the exhaust water is visually clear.
9 - Constantly monitor that the water temperature
values are within the normal operating temperature
limits (80°C / 95°C - 176°F / 203°F).
10 - Stop the engine and immediately close the
12 - Check that the sea water seal gasket is cor-
cover (M).
13 - Open the sea water inlet.
14 - Start the engine and keep it at idle speed for
the time necessary for a functional check.
15 - Turn off the engine when the check is over.
IMPORTANT
In the event of leaks, air inside the circuit,
abnormal increase of the operating
temperature, turn off the engine and contact an
authorised VM MOTORI FCA ITALY workshop.
English
IMPORTANT
In stored crafts having the sea water inlet
closed, it is always necessary to write a sign
and engine starter key, informing that the sea
water inlet is closed and that it must be opened
before starting the engine.
IMPORTANT
Do not dump any polluting material in the en-
vironment. Carry out their disposal in compli-
ance with the relevant legislation in force.
52
42432070F
MR 506
Ed.1 - Nov. 2019
Publicidad
