Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT
GB
If the ambient temperature is such to cause
the freezing of the water separated in the fuel
cooled down after use.
CAUTION - WARNING
Fuel polluted by water causes rusting, corro-
sion and damage to fuel circuit components.
FUEL SUPPLY CIRCUIT BLEEDING
Follow the procedure below.
1 - Turn off the engine and turn off the ignition key
and disconnect the negative battery cable.
2 - Let the engine cool down adequately to avoid
the risk of burning.
3 - Prepare a container of appropriate capacity.
4 - Loosen the screw (E).
5 - Manually operate the pump (F) to bleeding the
air from the circuit.
6 - Make sure that from the bleed screw (E) there
7 - Tighten the screw (E).
8 - Dry the fuel residues before starting the engine.
IMPORTANT
Please contact an authorised VM MOTORI FCA
ITALY workshop if needed.
IMPORTANT
Do not dump any polluting material in the en-
vironment. Carry out their disposal in compli-
ance with the relevant legislation in force.
English
IMPORTANT
Dispose of the polluted fuel in accordance
with the applicable laws in the area where the
operation is carried out.
56
42432070F
MR 506
E
F F
Ed.1 - Nov. 2019
Publicidad
