Descargar Imprimir esta página

VM Motori MR 506 Manual De Instrucciones Para El Uso página 111

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

ENGINE OIL LEVEL CHECK
IMPORTANT
Turn off the engine and remove the ignition
utes from its turning off, paying attention not
to touch the engine parts to avoid the risk of
burning and scalding.
To check the engine oil level, follow the procedure
below:
1 - Clean the area surrounding the oil dipstick (L)
2 - Remove the oil dipstick (L) clean it with a
3 - Remove the oil dipstick (L) again and check
that the oil level is between the "MIN" and "MAX"
notches.
(M).
IMPORTANT
For the correct quantity and compliance of oil
introduced into the engine, refer to the table
on page 14.
until it reaches the correct level.
CAUTION - WARNING
When checking the engine oil level with the
boat outside the water, operate with the en-
gine in a horizontal position and parallel to the
engine support surface.
English
-
IMPORTANT
When the engine is off and lukewarm after
running, the oil level must be between the
IMPORTANT
Do not dump any polluting material in the en-
vironment. Carry out their disposal in compli-
ance with the relevant legislation in force.
45
M
L
42432070F
Ed.1 - Nov. 2019
MR 506
GB
L

Publicidad

loading

Este manual también es adecuado para:

Mr506sh3