Honda Motor GCV145 Manual Del Propietário página 15

3RZ9S8002.book 10 ページ ２０２０年３月１８日 水曜日 午前１１時４３分
Descriptive Term Applicable to Emissions Durability Period
Moderate 50 hours (0–80 cc, inclusive)
125 hours (greater than 80 cc)
Intermediate 125 hours (0–80 cc, inclusive)
250 hours (greater than 80 cc)
Extended 300 hours (0–80 cc, inclusive)
500 hours (greater than 80 cc)
1,000 hours (225 cc and greater)
The Air Index Information hang tag/label must remain on the engine
until it is sold. Remove the hang tag before operating the engine.
Specifications
GCV145
Model
Description code
Length × Width × Height
Dry mass [weight]
Engine type
Displacement
Bore × Stroke
Net power 3.1 kW (4.2 bhp, 4.2 PS) at 3,600 rpm
(in accordance with SAE J1349*)
Max. Net torque 9.1 N∙m (6.7 lbf∙ft, 0.93 kgf∙m) at 2,500 rpm
(in accordance with SAE J1349*)
Engine oil capacity
Fuel tank capacity
Cooling system
Ignition system
PTO shaft rotation
GCV170
Model
Description code
Length × Width × Height
Dry mass [weight]
Engine type
Displacement
Bore × Stroke
Net power 3.6 kW (4.8 bhp, 4.9 PS) at 3,600 rpm
(in accordance with SAE J1349*)
Max. Net torque 11.1 N∙m (8.2 lbf∙ft, 1.13 kgf∙m) at 2,500 rpm
(in accordance with SAE J1349*)
Engine oil capacity
Fuel tank capacity
Cooling system
Ignition system
PTO shaft rotation
GCV145H
GJAMH
415 × 362 × 360.5 mm
(16.3 × 14.3 × 14.2 in)
11.8 kg (26.0 lbs)
4-stroke, OHV, single cylinder
3
145 cm (8.8 cu-in)
56.0 × 59.0 mm (2.2 × 2.3 in)
0.40 L (14 US oz, 0.35 Imp qt)
0.91 L (0.24 US gal, 0.20 lmp gal)
Forced air
Transistor type magneto ignition
Counterclockwise
GCV170H
GJANH
415 × 362 × 360.5 mm
(16.3 × 14.3 × 14.2 in)
11.8 kg (26.0 lbs)
4-stroke, OHV, single cylinder
3
166 cm (10.1 cu-in)
60.0 × 59.0 mm (2.4 × 2.3 in)
0.40 L (14 US oz, 0.35 Imp qt)
0.91 L (0.24 US gal, 0.20 lmp gal)
Forced air
Transistor type magneto ignition
Counterclockwise
GCV200
Model
Description code
Length × Width × Height
Dry mass [weight]
Engine type
Displacement
Bore × Stroke
Net power
(in accordance with SAE J1349*)
Max. Net torque 12.7 N∙m (9.4 lbf∙ft, 1.30 kgf∙m) at 2,500 rpm
(in accordance with SAE J1349*)
Engine oil capacity
Fuel tank capacity
Cooling system
Ignition system
PTO shaft rotation
*
The power rating of the engine indicated in this document is the net
power output tested on a production engine for the engine model and
measured in accordance with SAE J1349 at 3,600 rpm (Net Power) and
at 2,500 rpm (Max. Net Torque). Mass production engines may vary
from this value.
Actual power output for the engine installed in the final machine will
vary depending on numerous factors, including the operating speed of
the engine in application, environmental conditions, maintenance, and
other variables.
Tuneup Specifications GCV145/170/200
ITEM SPECIFICATION
Spark plug gap 0.7–0.8 mm
(0.028–0.031 in)
Idle speed 1,700±150 rpm
Valve clearance IN: 0.10±0.02 mm
(cold) EX: 0.10±0.02 mm
Other
specifications
Quick Reference Information
Fuel Unleaded gasoline (Refer to page 4).
U.S.
Except
U.S.
Engine oil SAE 10W-30, API SE or later, for general use.
Refer to page 5.
Spark plug BPR5ES (NGK)
Maintenance Before each use:
• Check engine oil level. Refer to page 5.
• Check air cleaner. Refer to page 5.
First 5 hours:
Change engine oil. Refer to page 5.
Subsequent:
Refer to the maintenance schedule on page 4.
NOTE:
Specifications may vary according to the types, and are subject to change
without notice.
ENGLISH
GCV200H
GJAPH
415 × 362 × 360.5 mm
(16.3 × 14.3 × 14.2 in)
11.8 kg (26.0 lbs)
4-stroke, OHV, single cylinder
3
201 cm (12.3 cu-in)
66.0 × 59.0 mm (2.6 × 2.3 in)
4.2 kW (5.6 bhp, 5.7 PS) at 3,600 rpm
0.40 L (14 US oz, 0.35 Imp qt)
0.91 L (0.24 US gal, 0.20 lmp gal)
Forced air
Transistor type magneto ignition
Counterclockwise
MAINTENANCE
Refer to page 6
-
See your authorized
Honda dealer
No other adjustments needed.
Pump octane rating 86 or higher
Research octane rating 91 or higher
Pump octane rating 86 or higher
10