Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento página 101

Timelapse
This setting activates the time lapse feature to automatically record a still frame at the
following intervals:
Frames 2 - 10
Seconds 1 - 10, 20, 30, 40, 50
Minutes 1 - 10
For example, you can set the camera to record a still frame every 10 frames, 5 seconds,
30 seconds, 5 minutes etc.
The time lapse feature offers many creative options. For example, setting a 2 frame time lapse
interval will give your recorded video a high speed effect when played back.
The format of each still frame is based on your recording format, so if you set the camera to
record in 4K ProRes HQ, the time lapse setting will maintain this format. The frame rate will be
based on your project frame rate setting, i.e., 24 fps. This is so your time lapse footage can be
easily incorporated into your post production workflow.
Your URSA Mini will indicate it is in time lapse
mode with an icon over the 'record' button
TIP When you record footage in time lapse mode, the timecode counter updates
when a frame of video is recorded.
Detail Sharpening
Use this setting to sharpen your URSA Mini's image. Detail sharpening is available on URSA Mini
Pro 4.6K G2, URSA Mini Pro 4.6K, URSA Mini 4.6K and URSA Mini 4K. When sharpening is
enabled, decrease or increase the level of sharpening by selecting 'default', 'medium' or 'high'.
When sharpening is enabled, it will be applied to ProRes video recorded on camera as well
as your URSA Mini's SDI output. When URSA Mini Pro G2 is set to Blackmagic RAW and is
used in conjunction with an ATEM switcher, the detail sharpening function can be applied to
your SDI output. This can be switched on or off using the ATEM Camera Control Panel or
ATEM Software Control.
This setting is intended for live studio production where there is no time for post production
and you want to output the image live to air. We recommend leaving it 'off' for images you are
recording for further post production. For this reason, sharpening is not applied to Blackmagic
RAW files that are intended for significant post processing.
Stop Rec If Card Drops Frames
Use this setting to configure your URSA Mini's behavior when dropped frames are detected.
When set to 'off,' recording will continue with dropped frames. When set to 'on,' your camera
will stop recording if dropped frames are detected. This can prevent you wasting time shooting
unusable footage if you don't spot the dropped frame indicator.
Settings 101