Blackmagic Ursa Mini Pro Shim Kit - Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento

Blackmagic URSA Mini Pro Shim Kit

When attaching the PL, B4 or F mounts to URSA Mini Pro, a 0.10mm shim is added to the
original 0.50mm and 0.10mm shims underneath the original EF mount. This shim and others
are included in the Blackmagic URSA Mini Pro Shim Kit. Other thicknesses are included in the
kit in case you need to re-shim your camera to suit PL lenses that may require slightly different
clearances to maintain accurate focus marks.
The shim kit includes:
1 x Baffle tool
Use the baffle tool to loosen or tighten the PL baffle when
removing or attaching the PL mount to your URSA Mini Pro.
1 x Shim set
The shim set includes the following thicknesses:
0.50mm 0.18mm
0.30mm 0.15mm
0.20mm 0.12mm
0.10mm
0.05mm
0.025mm
Interchangeable Lens Mount 220