Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento página 75

Touch to focus
You can focus compatible lenses in any region of the image by pressing the LCD screen for a
moment where you want to focus. The camera will focus your lens in the chosen location.
Pressing the 'focus' button on the camera or the optional handgrip following this will trigger
auto-focus in that specified region. Double pressing the 'focus' button will reset the focus point
to the center of the screen.
URSA Mini LCD touchscreen with press to focus
TIP If the 'heads up display' is obscuring the area you wish to focus whilst using
'touch to focus', simply swipe it up or down to move it out of the way.
Frame Guides
The 'frame guide' setting toggles the appearance of frame guides on the LCD touchscreen.
You can also choose from eight frame guide options for all outputs on your URSA Mini.
Frame guides include aspect ratios for various cinema, television and online standards.
Tap the 'frame guides' icon while accessing 'LCD monitor options'
to access your URSA Mini's frame guide settings
To toggle the appearance of frame guides on your URSA Mini's LCD touchscreen, tap the switch
icon in the bottom left of the screen.
Choose the frame guide you want to use by dragging the slider left and right, or tapping the
arrow buttons on either side of the currently selected aspect ratio.
The available guides are:
2.35:1, 2.39:1 and 2.40:1
Displays the broad widescreen aspect ratio compatible with anamorphic or flat
widescreen cinema presentation. The three widescreen settings differ slightly based
on the changing cinema standards over time. 2.39:1 is one of the most prominent
standards in use today.
Touchscreen Controls 75