Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento página 106

Display
Instead of a histogram and audio meters, your URSA Mini can display codec and resolution
information at the left and right bottom edges of the LCD touchscreen. This can be useful if you
prefer to use false color for dialling in exposure, or are recording audio separately and want to
display additional information in the space normally used by the histogram and audio meter.
Simply tap 'meters' or 'codec and resolution' in the 'LCD' menu to select your preferred view.
Your URSA Mini can display codec and resolution information
in place of the histogram and audio meters
Screen Brightness
Drag the 'screen brightness' slider in the 'LCD' menu left or right to adjust the brightness of your
URSA Mini's LCD touchscreen.
Front SDI and Main SDI Monitor Settings 2
The second page of your URSA Mini's 'front SDI' and 'main SDI' monitor tab contains settings
unique to your front and main SDI outputs.
2160p and 1080p resolutions are available on your main SDI output as all times
when shooting at resolutions above 3K anamorphic. 1080i is only available
for your camera's main or front SDI output when shooting at frame rates of 50,
59.94, or 60. '3G SDI level' is available on URSA Mini Pro 4.6K G2 only
Status Text
It can be useful to hide the status text and meters on your front SDI or main SDI output, leaving
only the information necessary to compose or direct a shot. Tap the 'status text' switch icon in
the 'front SDI' or 'main SDI' monitor menus to toggle the appearance of status text and meters
for that output. Overlays such as frame guides, grids, focus assist and zebra will remain visible,
if enabled.
Swiping up or down on your URSA Mini's LCD touchscreen has the same effect for
the touchscreen.
Settings 106