Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento página 169

Focus Assist
The 'focus assist' setting toggles the appearance of peaking on the viewfinder. You have the
choice of 'red', 'green', 'blue', 'black' and 'white' as well as traditional peaking.
Frame Guide
Gives you the option to show 'frame guides' as part of your Studio Viewfinder's 'Guides'. When
connected to URSA Mini they will match your camera's 'frame guides' aspect ratio. When
connected to other systems they will default to the 14:9 aspect ratio.
Safe Area Guide
Gives you the option to show the 'safe area' indicator as part of your Studio Viewfinder's
'Guides'. When connected to URSA Mini these will match your camera's 'safe area guide'
percentage. When connected to other systems they will default to 90%.
Grid
Gives you the option to show grids as part of your Studio Viewfinder's 'Guides'.
When connected to URSA Mini these will match your camera's 'grids' settings.
When not connected, this will switch your crosshairs on or off.
Cursors
The cursors allow you to mark an area on screen where graphics like a lower third, graphic,
logo or ticker will be overlaid. To adjust these cursors go to 'cursors' and select 'edit cursors'.
This will bring up a page that shows you all three cursors and allows you to select each one
individually and then dial in the width, height, x and y co-ordinates for positioning each one
individually.
The cursors submenu
Cursors displayed on screen
Blackmagic URSA Studio Viewfinder 169