Blackmagic Design URSA Mini Manual De Instalación Y Funcionamiento página 120

Reference Source
This setting is used to select the reference source. Your URSA Mini can lock to an internal or
external reference source, or to the reference signal in program input from an ATEM switcher.
If you are using your URSA Mini with an ATEM Switcher's camera control function, you should
always set your reference source to 'program' unless the switcher itself and all connected
cameras are set to an external reference.
NOTE When you are setting your reference source for URSA Mini, you may
experience a small dropout on your camera's outputs when switching between your
reference sources. This is because the camera is adjusting its referencing timing to
match that of the external source. For this reason it is important not to change this
setting during a production and only while setting up.
Reference Timing
These settings allow you to manually adjust the reference timing on a line or pixel basis.
Simply tap the arrow icons on either side of the 'lines' and 'pixels' settings to make adjustments.
Program Audio Source
This setting is only available for URSA Mini Pro. When connected to a switcher, setting 'program
audio' to 'on' prioritizes the program return audio as your input source to be mixed with talkback
when monitoring using headphones or a headset. This is useful when you are not feeding the
switcher audio from your camera but you still want to listen to the program feed from the
switcher via the 'SDI in' port. Setting 'program audio' to 'off' prioritizes audio from your camera's
internal mics or 'audio in' XLR ports, and is the default setting.
Program Mix
This setting changes the balance of camera sound to talkback sound. The headphones will
output audio following what is displayed on the LCD. For instance, if you are in camera view,
camera audio is heard. If you are in program view, program audio is heard. The default
setting is 100%.
Headset Mic
Move this volume slider left or right to increase or decrease audio microphone input levels.
The default setting is 50%.
Sidetone Level
Adjust this slider to set the volume of your own voice mic in your headset.
Settings 120