23
Broadcast Lens Control Connector
Provides power and control to compatible PL and B4 mount lenses with 12 pin
connections. This connection is available on URSA Mini PL and URSA Mini Pro models.
This output combined with the +12V Power Output supplies 12 Volts at up to
2 Amps in total.
Rear Panel
24
Battery Mount Plate
Your Blackmagic URSA Mini has mounting points and a recessed molex connector to
supply power to and from the camera as well as carrying some data information. The
mounting holes are positioned so that you can attach optional accessories such as
battery plates, Blackmagic Camera Fiber Converter or URSA Mini Recorder onto the
back of the camera. When in use, the recessed molex connector can output a regulated
12 Volts at up to 1.5 Amps. For more information, see the chapters for 'Mounting
Batteries', 'Getting Started with Blackmagic Fiber Converters' and 'URSA Mini Recorder'.
25
LANC
This 2.5mm jack is used for external LANC remote control, such as an external record
start stop control mounted to a tripod arm. LANC supports record start and stop, plus
iris and focus control using compatible EF lenses. URSA Mini Pro 12K does not have a
LANC port on the rear panel. For LANC control of URSA Mini Pro 12K, use the 2.5mm
TRS 'LANC input' connector on the right side panel.
24
26
12G-SDI Out
Blackmagic URSA Mini's 12G-SDI output is used to send HD and Ultra HD video to
SDI equipment such as routers, monitors, SDI capture devices, and broadcast
switchers. You can also connect the 12G-SDI output to an external recorder such as
the Blackmagic Video Assist for backup recording.
27
12G-SDI In
The 12G-SDI input is used for connecting to a switcher or external recorder and can be
used to view playback, talkback, tally or external reference signals. When used with an
ATEM switcher, you can also adjust the camera functions using the switcher's 'camera
control' feature.
25
26
27
28
29
30
URSA Mini Pro 4.6K G2, URSA Mini Pro 4.6K,
URSA Mini 4.6K and URSA Mini 4K
30
31
URSA Mini Pro 12K
Introduction to URSA Mini
55